Write a Review

Race Face's Ride stem is designed specifically for riders looking for Race Face engineering and quality at a value price point. - Forged and shot peened from 6061 aluminum for high strength and fatigue resistance at a reasonable weight - Four bolt bar clamp holds bar securely in position - Machined logo on bar clamp

SRAM's PC-870 Chain makes a trusty partner over hill and dale. It's easy to install, too, thanks to the no-tools-needed PowerLink. Quiet, smooth and reliable, the PC-870 will take you where you want to go.

Hose Kits, Barbs and Strain Relief for Servicing Reverb Lines.

Lighter, stiffer, and more tunable than its competitors, the Mattoc is the desired componentry for all bikes. The Mattoc Expert should be on your bike not just because it can address all needs, but because it can improve the riding experience in a meaningful way. The Expert version of #thepeoplesfork tips the scales at a scant 1770 grams yet is stiffer than nearly anything else available in its travel range. Translation: an extremely lightweight and efficient build whose industry-leading stiffness ensures precise and reactive handling ready to outperform any other product it is compared to. The Manitou Expert boasts an Expert Air spring with IVA, compression damping via the VTT-6P system, and rebound damping via an open cartridge with adjustable TPC. True to Manitou’s industry-leading tuning capabilities, the Expert allows adjustments via Air, Air Volume, Rebound, and 3-position Compression (Open, Trail, Lock) With Open Mode Low-Speed Compression Adjustment. Perhaps the most versatile fork available not only in terms of travel but also application and customization of performance. Such amazing performance, tailor-tuned to your needs, arises from Manitou’s never-ending search for a smoother and better, best ride. KEY FEATURES - 27.5” is 20g less than the previous model. - Over 19% stiffness increase from the current 27.5" 160mm to the new 27.5" 150mm. 29" Stiffness increases are higher. - Expert air allows for internal travel adjustments with no added parts. New travel spacers account for negative air volume change, so the 110mm fork has the same initial stroke feel as the 150mm - Expert Air spring systems contain a unique balancing valve that equalizes the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel. Expert Air has identical performance to DoradoTM Air in a more cost-effective package. - Incremental Volume Adjust (IVA) modifies the volume in the positive air chamber with self contained spacers dictating the position of the IVA piston. This allows the main air spring ramp-up to be tuned to the rider's weight, style, and conditions without the need for additional parts. - A single external compression adjuster that simultaneously adjusts HS and LS damping characteristics. It features a fixed shim stack and a secondary shim stack that is preloaded by the external adjuster. The resulting wide tuning range combines the benefits of a low-speed platform and high-speed progressive tune can suit any terrain. - Trail Side Relief casting bleed screws allow users to release casting pressure from the fork. Casting pressure increase is normal, and extreme riding can increase the pressure at a fast rate. Temperature and elevation changes can also cause increased casting pressure. Releasing casting pressure can improve overall fork feel and small bump compliance.

Trail riding can be tough on your gear. The ends of your Next SL G4 cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!

Dimension's Urban Cruiser Bar is a great way to customize your ride. Available in a variety of configurations to suit your needs and style. - Material: Aluminum - Lever Compatability: Mountain 22.2mm

Grab control of your next mountain bike ride. The Comp Trail Grips deliver a comfortable ride experience in a practical package. - Single-density, non-slip Kraton rubber - Ergonomically designed with molded and raised TR logos - Closed end design - 125mm length - 32mm diameter - 116g/pr

The Problem Solvers Backstop bolts onto the frame to provide two stops for your cable housing. It's made of light, durable CNC-machined aluminum with a stainless-steel bolt, and the stops are slotted for easy cable installation/removal.

SRAM's XX1 Ceramic Bearing Rear Derailleur Pulleys run on super-smooth, efficient ceramic bearings so your drivetrain rolls with ease. They are lighter than conventional pulleys and even come with SRAM's ceramic-bearing grease in an easy-to-use 10ml syringe.

Claris HG50 cassettes ensure a durable and low maintenance system that's easy-to-operate, with accurate and light-action shifting for Shimano 8-speed drivetrains. - Nickel plated finish for corrosion resistance - Steel lock ring - MODEL NO: CS-HG50-8 - SERIES: SHIMANO CLARIS R2000 Series - Compatible chain: CN-HG71 - Speeds: 8-speed - Type: HG

Miscellaneous replacement small parts for Hayes hydraulic disc brake systems. - Includes piston and seal

Cane Creek compatible integrated style bearings fit directly into headtube. - 36-degree inner chamfer and 45-degree outer chamfer - Crown Race: 30 - S.H.I.S. Lower: IS41 - S.H.I.S. Upper: IS41 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless

Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes

The KMC Z1 Wide EPT chain is a durable and low-maintenance chain suited for all single-speed riding styles, such as BMX and fixed gear, fitness bikes, internally geared hub systems, and share bikes. - Eco ProTeQ treatment offers superior anti-rust protection - Anti-drop design provides increased chain retention

- Lever Internals Gen 2 Guide RSC/Ultimate|Code RSC Qty 1

The "O" grips feature a lightweight, multi-directional rib design. - Made in the USA by ODI - Larger ribs run throughout the grip pattern for more control when you need it - Includes ODI Push-In style end plugs

The Gost pads feature a unique design to make install and set up easier. - Improved stiffness by built in toe-in into the pad shape and using a solid extruded aluminum frame - Assembly is simplified by lining up the rim and tightening a M6 female bolt

Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: US 5-10 // EU 37-43 - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair

The STYLO 6K DUB crankset delivers consistent performance every time out. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. 6000-series forged aluminum arms support the X-SYNC 2 chainring to provide complete chain control. Now everyone can benefit from a new measure of durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - 6003 series forged aluminum arms - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Boost Compatible - BB Included: No - Chainring BCD: SRAM Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 141/148 Boost Hubs

All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 17mm - Outer Diameter: 26mm - Width: 5mm

- For either front or rear shifter - Road & MTB compatible - 1.1 polished stainless steel cable

- Machined aluminum replacement derailleur hangers to fit a wide variety of frames - Please visit https://wheelsmfg.com/derailleur-hanger-tech-help for more updated info - Made in USA + Scott Spark 760 2017+; Spark 960 2017+; Contessa Spark 730 2017+

Fully wireless electronic shifting. Fully hydraulic disc braking. The SRAM RED eTap AXS HRD shift-brake system is the future. And the future is custom. AXS enabled and easily personalized for hand size and reach, this is the best shifting and braking experience — for all riders. - AXS-enabled for easy personalization - Simple and intuitive eTap shift logic - Personalize for your hands and preferences using the Contact Point Adjustment and separate Reach Adjust with HydroHC brake platform - Newly textured shift paddles and hoods for a better feel - Two ports for Blips on each lever - Bleeding Edge technology for easy and clean brake bleeds - Available in flat mount and post mount caliper options

Stay fully planted as you smash the mountain. The lightweight Smash pedal offers uncompromising performance with its strategically placed pins and bulletproof, extended axle design. - Body: Reinforced Premium Thermopoly - Axle: CNC-machined Cro-Mo - Bearings: Ultralight, self-lubricating sealed bushings - Replaceable pins - Size: 113mm x 114mm - Weight: 180g (each)

- Highly weight optimized single crown stem for use with 35mm handlebars - Dial your fit with micro increment size options, tuned to fit any rider size and style - Cockpit setup index lasered onto stem helps with tuning of upsweep and backsweep - Ultra-short stack height and true zero-degree rise - Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars - Recommended for: ASTM 5, All mountain, enduro, trail, free ride, E-Bike Specs: - Key Technologies: MGR Alloy, chamfered bar clamp, top-cap included - Material: 6-Series Alloy, 3D forged CNC optimized body - Rise (°): 0 - Diameter: 35mm - Stack height: 34mm - Weight: ±131g (35mm) / ±136g (40mm) ±139g (45mm) ±141g (50mm) - Finish: Shotpeen anodized

SRAM's GXP PressFit Road Bottom Bracket Cups are the premium choice for getting the most out of every pedal stroke. They feature smooth bearings that keep drag to a minimum and seals that keep debris out. Plus, these BB cups press directly into the frame without having to be threaded in for reduced weight and enhanced durability.

The Box Two shifter is the only shifter on the market (other than our Box One) that comes factory stock with a hinged clamp. Box Two is our performance tier so this shifter still maintains the durable cast aluminum top shell but trades out the Box One's 1-piece pull-lever for a 2-piece resin and steel variant. All Prime 9 shifters take advantage of the 9-speed's inherent durability, simplicity, and reliability. Not only is the shifter mechanism joyfully simplified, but fewer shifts are needed for every mile of travel. And the best part is? Prime 9 is also terribly forgiving so you won't have to constantly adjust your set-up. Available as a multi-shift (pull several gears at once) or single-shift shifter (a sound choice for e-bikes).

The X-TRACK RACE shares its design with the CARBON and Ti models, offering a composite body and Chromoly+ axle for optimal stiffness while riding. The SPD mechanism functions reliably even in the most extreme conditions, shedding mud and debris which may get caught under your shoes. - Technology: X-Track - Cleats: X-Track Cleat included (Easy Cleat available separately) - Cleats standard: SPD compatible - Retention: 6 to 14 - Body: Composite - Spindle: Chromoly+ - Platform area: 515mm² - Platform width: 60mm - Stack height + cleats: 16.8mm (10.7 + 6.1mm) - Weight (pedal): 182g - Weight (pair + cleats): 415g - Float angle: 6° - Release angle: 13°

- C-220 degree extra-wide bar clamp improves stiffness and fits most riser bars - 3D forged 6061 alloy - 42mm steerer height with 41mm faceplate width - 142g (90mm)

The Shimano Tiagra R4720 Dual Control Levers bring the all-conditions confidence of hydraulic disc brakes and refined ergonomics to the quick and intuitive shifting cyclists expect from Shimano Tiagra. The Shimano Tiagra BR-4770 hydraulic disc brake caliper offers greater rider control in all conditions. With convenient one-way bleeding and easy hose joint system, installation and adjustment are simple. - Smaller lever size and new positioning improves ergonomics for riders with smaller hands - Smooth and effortless operation - Redesigned internal shifting unit - Greater confidence and control for riders with smaller hands in all conditions - Quick and intuitive rear shifting operation - Same level of shifting operation as high-end road groupsets - Integrated hydraulic brake and shifting lever - Convenient tool access - Easy and clean bleeding system - Simple set up and maintenance